Getting free OnlyFans subscribers is one thing – making that traffic profitable is another. See how one advertiser acquired 455 subscribers at just $1.02 each and achieved a 21.48% ROI with HilltopAds, without a landing page or manual optimization.
A free subscription is not a sale. For an advertiser promoting an OnlyFans creator, the question is whether those new subscribers can help generate enough earnings to cover the cost of bringing them in.
In this US campaign, the advertiser spent $462.95, acquired 455 free subscribers, and reported $562.40 in earnings attributed to HilltopAds traffic over the same reporting period. That puts acquisition cost at $1.02 per free subscriber, with a 21.48% ROI calculated from reported earnings and ad spend.
Join HilltopAds and see how far your OnlyFans campaign can go
with direct-link traffic, keyword targeting, and expert support.
The route to the profile was direct. There was no intermediate landing page, and Mike, the HilltopAds manager working on the campaign, reported no manual optimization during the run. The targeting started with four keywords and a hypothesis about users on recent operating-system versions.
Here is how the campaign was set up, what the numbers show, and what another creator advertiser can reasonably take from the result.
The creator’s identity and profile link are withheld at the advertiser’s request.
Check out another successful case study on promoting OnlyFans:
Key Points
Offer: OnlyFans creator profile
GEO: United States (US)
Traffic: Non-mainstream High/Medium
Campaign period: September 17-29, 2026 (13 days)
Ad format: Popunder Mobile
Campaign type: Smart CPM
CPM Rate: $2
CPA (Free Subscription): $1.02
Impressions: 212,355
Free subscribers: 455
Spend: $462.95
ROI: +21.48%
Free Subscribers, Real Acquisition Costs
OnlyFans is a creator platform built around subscriptions and paid interactions. Its revenue model includes subscriptions, tips and pay-per-view purchases.
For this campaign, however, the acquisition event was specifically a free subscription. The 455 conversions were not 455 paid subscriptions, purchases or paying customers.
The conversions in this campaign were free subscriptions, not paid subscriptions.
That distinction changes how the results should be read. A low cost per subscriber tells us how efficiently the campaign brought people into the creator’s audience. It does not tell us how many of those people spent money or how much each paying user spent.
The advertiser therefore supplied earnings alongside the subscriber count. The $562.40 was attributed to HilltopAds traffic during September 17-29, rather than being the profile’s total earnings from all traffic sources.
We do not have a breakdown by purchase type, so this case does not assign that revenue to tips, paid messages or any other individual feature. What we can compare is the cost of the traffic with the earnings attributed to it.
Check out our latest article on AdCash alternatives:
Straight to the Profile Without a Pre-Lander
The campaign sent users directly to the OnlyFans profile. There was no separate page introducing the creator, no additional offer page, and no intermediate step managed by the advertiser.
This suits the basic mechanics of Mobile Popunder: the format opens the advertiser’s destination page rather than requiring a click on a banner creative first. In this case, that destination was the creator’s profile.
Mobile Popunder is one of our top formats. For this type of offer, it is straightforward to launch and brings conversions. We sent the traffic directly to the profile, without an intermediate landing page.
The profile itself had to do the work of turning a visitor into a subscriber. There was no separate sales pitch to write, host or test before the user reached it.
That is a useful option for advertisers who already have a profile ready to receive traffic. It also keeps the acquisition path easy to inspect: the visitor reaches the profile and either subscribes or leaves.
This campaign tested the direct route; it did not compare performance with a pre-lander.

Register with the best ad network for advertisers HilltopAds
Four Keywords and a Clear Targeting Hypothesis
The campaign focused on US mobile traffic using four keywords: onlyfans · onlyfan · fansly · fans
These were not four competing ad creatives or four separate search campaigns. They formed part of the targeting configuration.
In HilltopAds, keyword targeting can relate to user interests or site content. It should not be interpreted as proof that every visitor had typed one of these terms into a search engine immediately before seeing the offer. Our campaign creation guide describes how keywords fit alongside the other targeting options.
The second part of the hypothesis was operating-system versions. Mike expected users on recent versions, combined with relevant keywords, to be more likely to convert and spend.
We started with the hypothesis that relevant keywords combined with recent OS versions would help us reach users more likely to subscribe and spend.
That was the reasoning behind the setup – not a conclusion from a controlled comparison of older and newer devices. The results supplied for this case do not include a keyword-by-keyword or OS-version breakdown.
The US provided a substantial market for the test. DataReportal’s Digital 2026 report estimates that the country had 324 million internet users and 93.1% internet penetration at the end of 2025. These figures describe the market’s scale; they do not establish how likely any particular user was to subscribe or pay.
For this advertiser, the practical choice was to test one country with a defined audience hypothesis, rather than spreading the budget across several GEOs.

Campaign Setup in HilltopAds
Before launching an advertising campaign on HilltopAds, register as an advertiser and open your Dashboard.
Go to Manage Campaigns and click Add Campaign. Here are the settings used in this campaign, following our campaign setup guide.
Start with the Campaign Settings
Select:
- Ad format – Popunder Mobile
- Type – Smart CPM
- Traffic channels – Non-mainstream High / Medium

For the destination URL, this campaign used a link directly to the creator’s OnlyFans profile.
Read our article to learn about the different types of marketing data and how to use them effectively:
Configure Targeting
The campaign used:
- Country – United States
- Device – Mobile
- Keywords – onlyfans, onlyfan, fansly, fans
- OS versions – Recent versions, according to the manager’s targeting hypothesis

Keyword targeting is listed among HilltopAds’ on-demand targeting options. Advertisers who do not see it in their Dashboard can contact their manager to enable it, as explained in our targeting documentation.
Set the Traffic Filters
For this campaign:
- Proxy – Disallow
- WebView – Disallow
Both filters were disabled in the supplied configuration.

Set the Bid and Daily Budget
The campaign notes specify:
- Reported CPM rate – $2
- Daily budget limit – $40
Smart CPM automates auction bidding within the advertiser’s maximum CPM. It is a bidding model, not a promise of a particular subscriber CPA.
Mike did not report a meaningful difference between Smart CPM and standard CPM for this campaign. We therefore do not attribute the subscriber cost or ROI to a proven advantage of Smart CPM over fixed bidding.

Average daily spend over the 13-day reporting window was $35.61, against a $40 daily limit.

No Manual Optimization During the Run
Mike reported that the campaign ran without manual optimization; the work was concentrated in the initial targeting setup.
There was no manual optimization. We worked from the initial hypothesis about keywords and recent OS versions.
Smart CPM still handled auction bidding automatically. That is different from the team manually changing targeting, testing a new landing page or making source-level adjustments.
This also puts a limit on what we can conclude. The results belong to the setup as a whole. They do not tell us how much of the outcome came from keywords, OS selection, the profile itself or the bidding model in isolation.
The campaign was still active when the figures were shared. The results below cover only September 17-29, 2026, rather than its full lifetime.
Results: 455 Free Subscribers and a 21.48% Return on Reported Earnings
The campaign delivered 212,355 impressions with $462.95 in ad spend between September 17 and 29. On the advertiser’s side, it generated 112,772 clicks and 455 free subscriptions.
As in our earlier OnlyFans acquisition case, we looked at both HilltopAds traffic data and the advertiser’s results. Impressions and spend were recorded in HilltopAds, while clicks and free subscriptions came from the advertiser’s tracking.
The cost per free subscriber came to $1.02. Based on the advertiser-reported clicks, CPC was $0.0041, with a 0.40% click-to-subscriber conversion rate.
Campaign Economics
The advertiser confirmed that the $562.40 in earnings came from HilltopAds traffic during the reporting period. With $462.95 in ad spend, the campaign achieved a +21.48% ROI, bringing in $99.45 more than the advertising cost.
For a campaign focused on free subscriptions, that earnings figure matters just as much as the subscriber count. It shows that the traffic generated revenue alongside new subscribers, rather than stopping at a free conversion.
The ROI reflects reported earnings against ad spend, without accounting for any additional business expenses. The next question is whether the same results can hold as the campaign scales.

Check out more success stories from our advertisers:
What We Would Repeat and What We Would Measure
Mike’s recommendation for an advertiser testing a similar offer was to start with the same approach.
For a similar offer, I would start with the same setup.
In practice, that means testing Mobile Popunder with relevant keywords, recent OS versions and a direct route to a profile that is ready to receive visitors. It is a starting configuration, not a universal recipe for every creator.
The measurement matters just as much as the launch. Keep free subscriptions separate from paid actions, use consistent reporting dates, and compare attributed earnings with acquisition spend. As the campaign grows, those numbers will show whether a low subscriber CPA is still translating into a worthwhile return.
Our event-tracking guide explains how supported tracking setups can separate different actions in a funnel.
The result here came from a relatively simple acquisition path and a specific targeting hypothesis. The next step would be to test whether those economics hold with more volume – not to assume that adding more spend will automatically produce the same return.
A free subscription can be a useful acquisition event. The earnings attributed to that traffic tell you whether it was worth buying.
Ready to test a creator campaign? Start with HilltopAds and work with your manager on the targeting and measurement for your offer.





















